With the dash beam now permanently attached to Frame #4, all structural work is finished on all of the frames.
 |
| I used System Three Silvertip epoxy, thickened with mahogany wood dust that I salvaged from sanding. Gussets are attached with 4 #8 3/4" bronze screws on each side. The solid stock is attached with 3 #10 1-3/4" bronze screws, countersunk into the vertical members of the frame. |
 |
| The 3/8" bungs were cut from scrap mahogany cut off of the keel. |
 |
| I trimmed the bungs with a big ol' traditional hand saw. Can you tell? |
 |
| Sanding the bungs... It's starting to look better. |
No comments:
Post a Comment